Hitachi XP P9500 User Manual page 143

Message ID
KAPL01050-I The currently selected paths will
be changed to the Online status.
Is this OK? [y/n]:
KAPL01052-I The currently selected paths will
be changed to the Offline(C)
status. Is this OK? [y/n]:
KAPL01053-I If you are sure that there would
be no problem when the path is
placed in the Offline(C) status,
enter y. Otherwise, enter n. [y/
n]:
KAPL01054-W During the offline operation
processing of the HDLM
command, a path that cannot be
placed in the Offline(C) status
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Message Text
Messages
Explanation
If you want to execute the
operation, enter y. If you want to
terminate processing, enter n. For
details on the clear operation,
see clear (Returns the Path
Statistics to the Initial Value) on
page 6-3. For details on the set
operation, see set (Sets Up the
Operating Environment) on page
6-15.
Details
The online operation will be
started. To continue the online
operation, enter y. To cancel the
operation, enter n.
Action
If you want to execute online
processing, enter y. If you want
to terminate processing, enter n.
For details on the online
operation, see online (Places
Paths Online) on page
Details
The offline operation will be
started. To continue the offline
operation, enter y. To cancel the
operation, enter n.
Action
If you want to execute the offline
processing, enter y. If you want
to terminate processing, enter n.
For details on the offline
operation, see offline (Places
Paths Offline) on page
Details
The offline operation will be
started. To continue the offline
operation, enter y. To cancel the
operation, enter n.
Action
If you want to execute offline
processing, enter y. If you want
to terminate processing, enter n.
For details on the offline
operation, see offline (Places
Paths Offline) on page
Details
A path that cannot be set to
Offline(C) was detected during
6-11.
6-7.
6-7.
8-9