Hitachi XP P9500 User Manual page 140

Message ID
KAPL01019-W The target path was not found.
KAPL01021-E
8-6
Message Text
Operation name = aa...aa
Cannot execute the HDLM
command due to insufficient
memory.
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Details
aa...aa: offline, online, or view
¢
¢
Action
¢
¢
Details
Memory required for HDLM
command processing could not be
allocated.
Action
Terminate unnecessary
applications to increase the
amount of free memory, and then
try again.
Messages
Explanation
offline/online operation
The specified path does not
exist.
view operation
The paths have not been
configured because creation
of the HDLM environment or
configuration changes to the
HDLM operating environment
have not finished.
offline/online operation
Use the view operation of the
HDLM command (dlnkmgr) to
check the settings, and then
retry. For details on the view
operation, see view (Displays
Information) on page 6-22.
view operation
Refer to 3 Creating an HDLM
Environment on page 3-1.
Creating an HDLM
Environment, and then
configure any paths that
exist. If the same message
appears again, execute the
DLMgetras utility for
collecting HDLM error
information, acquire the error
information, and then contact
your HDLM vendor or the
company for which you have
a service contract. For details
on the DLMgetras utility, see
The DLMgetras Utility for
Collecting HDLM Error
Information on page 7-2.