Advertisement
CARTON
CONTENTS
1.
Sweeper Housing Assembly
2.
3.
4.
Brace Rod
5.
6.
7.
Upper Hopper Tube (Rear)
8.
Side Hopper Tubes (2)
9.
Lower Hopper Tube, Right Hand
10.
Lower Hopper Tube, Left Hand
11.
Bag Support Rods (2)
12.
Hopper Mount Arms (2)
13.
Bag Frame Strap
14.
15.
3
/
4
/
TOOLS
REQUIRED
FOR ASSEMBLY
(1)
(2)
(2)
Screwdriver
9/16" Open End or Box End Wrench
1/2" Open End or Box End Wrench
ASSEMBLY
OF SWEEPER
•
Remove the 5/16" hex nut, 5/16" lock washers
and
5/16" flat washer from the two 5/16" x 1-3/4"
carriage bolts as shown in figure 1. Assemble
the
hitch tongue to the sweeper,
reusing the same two
carriage bolts, flat washers, lock washers and hex
nuts. Do not tighten
at this time.
REMOVAL
OF PARTS
FROM
CARTON
•
Remove the sweeper,
the loose parts and the
hardware package from the carton. Lay out the
parts and hardware
as shown on pages 3 and 4.
Note:
Right hand (R.H.) and left hand (L.H.) are
determined
from the operators position while seated
on the tractor.
SWEEPER HOUSING
5/16" x 1-314" CARRIAGE BOLT
FIGURE 1
HITCH TONGUE
5116"
FLAT WASHER
5/16" LOCK WASHER
5/16" HEX NUT
Advertisement
