Setting The Lamp Mode; Selecting The Lens Type; Reversing/Inverting Projected Images; Controlling Multiple Projectors With The One Remote Control - Sharp XG-P610X Operation Manual

Helpful Functions Set during Installation ("Options 2" menu)

2 2 2 2 2 Setting the Lamp Mode

This function allows you to select the usage of
the two lamps installed in the projector.
Selectable items
Both Lamps Both lamps are used for greater
brightness.
Lamp 1 Only The lamp 1 is used.
When the lamp 1 burns out, the lamp 2
automatically switches in use.
Lamp 2 Only The lamp 2 is used.
When the lamp 2 burns out, the lamp 1
automatically switches in use.
Equal Use Both lamps are used alternately for
certain periods.

3 3 3 3 3 Selecting the Lens Type

When you change the lens, you need to set the
lens type. See the table below to select the lens
type.
Selectable items
Type 1 AN-P8EX
Type 2 AN-P12EX
Type 3 AN-P15EZ
Type 4 AN-P18EZ
Type 5 AN-P23EZ
Type 6 AN-P30EZ
Type 7 AN-P45EZ
Info
• The Lens Shift, Keystone Correction, etc. may not
properly function if the correct lens type is not se-
lected.
Note
• When "Lens Type" is changed, "GEOMETRIC
ADJUSTMENT", "H&V KEYSTONE" and "IM-
AGE RESIZING" will be reset.
-62
Description
Attached lens
4 4 4 4 4 Reversing/Inverting
Projected Images
This projector is equipped with a reverse/invert
image function that allows you to reverse or in-
vert the projected image for various applications.
Selectable items
Front Normal image
Ceiling + Front Inverted image
Rear Reversed image
Ceiling + Rear Reversed and inverted image
Note
• This function is used for the reversed image and
ceiling-mount setups. (See page 23.)
5 5 5 5 5 Controlling Multiple
Projectors with the One
Remote Control
This function allows you to control multiple projectors
with the one remote control during the stack projec-
tion or the video wall projection. When using this func-
tion, connect the projectors with LAN cables and as-
sign a projector as the master and the other projectors
as the slaves.
See page 27
Selectable items
Normal The stack setting is not available.
Master
Set the projector as the master.
Slave Set the projector as the slave.
Note
• When controlling multiple projectors with the one
remote control, settings via web browser are re-
quired. Refer to the "SETUP MANUAL" contained
on the supplied CD-ROM for details.
• Only when controlling two projectors with the one
remote control, using "Pair Stack" allows you to skip
settings via web browser. (See page 63.)
• When "Slave" is selected on "Stack Setting", the slave pro-
jector cannot be controlled with the remote control.
To control the slave projector with the remote control, con-
nect the remote control to the projector. (See page 17.)
Menu operation Page
Description
for connecting LAN cables.
Description
47