Switching Subtitles - Sharp DV-HR300F Operation Manual

Dvd recorder with hard disc
Table of Contents

Advertisement

DVD/CD Playback
58
GB
4
Press SET/ENTER when you
reach the scene you want to end
Repeat Playback.
• The end point of the part (B) will be
memorized and the Repeat Playback
for the specified part (A-B) starts.
5
Press
(INPUT) to return to
normal playback.
Function Control
You can do things like specify a title or
chapter, and adjust settings for video and
audio if you press FUNCTION (under the
cover) during playback. (For details see page
61.)
Switching Audio
You can change the audio output channel
using the AUDIO button (under the cover).
Each time AUDIO is pressed, the
audio channels change as follows:
VIDEO CD
AUDIO CD
L+R
L
R
DVD VIDEO
The sound number which is currently played
back will be displayed.
DVD-RW
DVD-RW
DVD-R
VR MODE
VIDEO MODE
The sound you can select varies depending
on the sound recorded on the disc. (page 93)
• When recording bilingual broadcast or
stereo, the way audio channel changes
may differ depending on the recorded
sound. See the table on page 93 for details.
NOTE
• When you play a programme recorded in
stereo or monaural, and if you are listening
to the BIT STREAM sound via the digital
output jack, you cannot select the audio
channel. Set "DIGITAL AUDIO OUTPUT" to
"PCM" (see page 88), or if you want to
change the audio channel, listen via the
analogue output jacks.

Switching Subtitles

DVD VIDEO
If subtitles are provided in multiple lan-
guages, you can switch between them.
1
Press SUBTITLE (under the
cover) during playback.
• The display indicates the subtitle
number currently being played back,
and the subtitles appear.
• "✕✕" is displayed if a disc has no
subtitles.
2
Press ' / " to select the subtitles
you want to see.
• You can select by pressing SUB-
TITLE.
• The display indicates the subtitle
number currently being played back,
and the subtitles appear.
• To hide the subtitles, press \ \ \ \ \ / | | | | | a
few times and select "OFF".
You can also select "OFF" by
pressing SUBTITLE or '
Zoom
You can magnify your favorite section by
pressing
ZOOM during playback.
• Each time you press this button, the zoom
setting cycles in the following sequence:
ZOOM: 1 (approx. 1.2✕)¡ZOOM: 2
(approx. 1.5✕)¡ZOOM: 3 (approx.
2.0✕)¡OFF (No display)
• You can move the enlarged part with '
" "
" " / \ \ \ \ \ / | | | | | .
"
Switching Angle
DVD VIDEO
If multiple angles are recorded, you can
switch between them.
Press ANGLE (under the cover)
during playback.
• The display indicates the angle number
currently being played back. Each time you
press this button, the angle switches.
• The angle can also be switched by
' '
' ' / "
" " .
" "
pressing '
• "✕✕" is displayed if a disc is recorded with
only one angle.
To return to the previous angle, press ANGLE
(under the cover) a few times to select the
original angle.
NOTE
• The following operations will not work when
playing back an audio CD:
Slow Playback, Frame Advance/Reverse
Display of functions
• The display for subtitle, angle or audio
automatically disappears after 10 seconds.
The display can also be hidden by
pressing SET/ENTER.
Switching between functions
• You can switch subtitle, angle and audio at
the Function Control screen (page 61).
• Operation for each function varies depend-
ing on the disc. See the manual for the
disc.
' ' / "
' '
" " .
" "
' ' /
' '
ZOOM: 1
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-hr350f

Table of Contents