Playing 2 Channel Audio With A Digital Connection - Sharp DV-HR300F Operation Manual

Enjoying High Quality Sounds
Playing 2 Channel Audio with a
Digital Connection
The Recorder
DIGITAL AUDIO Output
COAXIAL jack
To DIGITAL
AUDIO Output
COAXIAL jack
Coaxial digital cable
(commercially available)
To coaxial digital
Important!
• When using this connection, set "DIGITAL AUDIO
OUTPUT" to "PCM" (see page 88).
Digital Connection to an MD Recorder to Record a CD
• When you are using a digital connection to record
the contents of a CD to an MD, the track numbers of
the CD may not match the track numbers recorded
to the MD.
80
GB
To DIGITAL
AUDIO Output
OPTICAL terminal
Optical digital cable
or
(commercially available)
To optical digital
input terminal
input jack
Audio equipment with an
optical or coaxial digital
input terminal
Digital Connection to an MD Recorder or
Other Audio Equipment without a Dolby
Digital Decoder
Audio CD or Video CD
• You can enjoy these discs by playing them back by the
ordinary playback procedure. (The normal audio output
is not played back for discs recorded with DTS.)
DVD Video Disc
• There is no audio signal generated for DVD video discs
recorded with DTS. A processor or amplifier equipped
with a DTS Surround decoder function is required to enjoy
DTS audio.