Replacing The Air Filter; Cleaning And Replacing The Air Filter - Sharp XV-Z10E Operation Manual

Replacing the Air Filter

• This projector is equipped with air filters
to ensure the optimal operating condi-
tion of the projector.
• The air filters should be cleaned every
100 hours of use. Clean the filters more
often when the projector is used in a
dusty or smoky location.
• Ask your nearest Sharp Authorized Pro-
jector Dealer or Service Center to ex-
change the filter (PFILDA010WJZZ) when
it is no longer possible to clean.
Cleaning and Replacing
the Air Filter
1
Put the projector into the standby
mode, and disconnect the power
cord.
• Press
on the projector or
the remote control, and wait until the cool-
ing fan stops.
2
Remove the filter cover on the
bottom of the projector.
• Turn the projector over. Loosen the user
service screw (for filter cover) (1) that se-
cures the filter cover. Pressing the tab, re-
move the filter cover (2).
3
Remove the air filter.
• Pick the air filter up with your fingers and
lift it out of the filter cover.
" " Bottom view " " "
Air filter
(not removable)
on
1
2
Tab
" " Front view " " "
Air filter
Air filter
STANDBY
button
STANDBY
button
User service screw
(for filter cover)
-61