Adjusting The Projected Image Position; Freeze Image; Freezing A Moving Image - Sharp XV-Z10E Operation Manual

Adjusting the Projected
Image Position
Adjust the projected image position
using the lens shift lever.
Info
• When using the projector (during projection),
be sure not to subject the projector to any
impact. If the projector is subjected to impact,
the projection image may deviate from the
adjusted position.
• When transporting or carrying the projector,
attach the lens shipping block and the lens
cap to the projector.
• When the angle is being adjusted using the
adjustment foot, deviation of the projected
image arising when carrying out lens shift in
the lateral direction cannot be corrected by
the Keystone Correction.

Freeze Image

You can instantly freeze a moving image with
the remote control.
Freezing a Moving
Image
1
Press .
• The projected image is frozen.
2
Press again to return to the
moving image from the currently
connected device.
FREEZE button
-33