Connecting To Video Equipment; Connecting To Video Equipment With An S-Video Output Terminal (Input 2); Connecting To Video Equipment Without An S-Video Output Terminal (Input 3) - Sharp XV-Z10E Operation Manual

Connecting to Video Equipment

Connecting to Video Equip-
ment with an S-video Output
Terminal (INPUT 2)
Using a commercially available S-video or audio
cable, a VCR or other audio-visual equipment can be
connected to INPUT 2 and AUDIO INPUT terminals.
1
Connect the projector to the video
equipment using an S-video cable
(commercially available).
2
Connect the projector to the video
equipment using a ø3.5 mm
minijack to RCA audio cable
(commercially available).
Note
• The INPUT 2 (S-VIDEO) terminal uses a video
signal system in which the picture is separated
into colour and luminance signals to realise a
higher-quality image. To view a higher-quality
image, use a commercially available S-video
cable to connect the INPUT 2 terminal on the
projector and the S-video output terminal on the
video equipment.
• A ø3.5 mm minijack to RCA audio cable (com-
mercially available) is required for audio input.
Connecting to Video Equip-
ment without an S-video
Output Terminal (INPUT 3)
Using a composite video cable or audio cable, a
VCR or other audio-visual equipment can be con-
nected to INPUT 3 and AUDIO INPUT terminals.
1
Connect the projector to the video
equipment using a composite
video cable.
2
Connect the projector to the video
equipment using a ø3.5 mm
minijack to RCA audio cable (com-
mercially available).
To INPUT 2 terminal
S-video cable
(commercially available)
To S-video output
terminal
VCR or other audio-visual equipment
To INPUT 3 terminal
Composite video cable
To video output
terminal
VCR or other audio-visual equipment
To AUDIO INPUT
terminal
ø3.5 mm minijack to
RCA audio cable
(commercially
available)
To audio output
terminal
To AUDIO INPUT
terminal
ø3.5 mm minijack to
RCA audio cable
(commercially
available)
To audio output
terminal
-21