Replacing The Air Filter - Sharp Notevision XG-C58X Operation Manual

Replacing the Air Filter

• This projector is equipped with air fil-
ters to ensure the optimal operating
condition of the projector.
• The air filters should be cleaned ev-
ery 100 hours of use. Clean the filters
more often when the projector is used
in a dusty or smoky location.
• Ask your nearest Sharp Authorized
Projector Dealer or Service Center to
exchange the filter (PFILDA017WJZZ)
when it is no longer possible to clean.
Cleaning and replacing
the bottom air filter
1
Press
STANDBY
or on the remote control to
put the projector into the
standby mode.
• Wait until the cooling fan stops.
2
Disconnect the power cord.
• Unplug the power cord from the AC
socket.
3
Remove the bottom filter cover.
• Turn over the projector. Grab the tab
and slide open the filter cover in the
direction of the arrow.
4
Remove the air filter.
• Pick the air filter up with your fingers
and lift it out of the filter cover.
on the projector
Air filter (not removable)
STANDBY button
M4
M4
M4
M4
Air filter
STANDBY
button
AC socket
Tab
-81