Table of Contents
Advertisement
Quick Reference
This section introduces the quick reference for using the projector. Refer to the page for details on
each procedure.
Setup and Projection
Connection of the projector and the video equipment with an S-video terminal is explained as an
example below.
1.
Place the projector facing a wall or a screen
2.
Connect the projector to the video equipment and plug the
power cord into the AC socket of the projector
After connecting, play back the video image.
When connecting other devices, see pages 12, 22, 23, 24 and 25.
3.
Turn the projector on
Press the ON button to turn the projector on.
-8
3
ON button
4
INPUT button
5
Adjustment buttons
('"\ |)
6
STANDBY button
5
Zoom knob
5
Focus ring
5
Lens shift lever
5
HEIGHT ADJUST button
On the projector
6
STANDBY button
3
ON button
5
KEYSTONE button
5
Adjustment buttons
('"\ |)
4
INPUT 2 button
Insert the batteries inside the
battery compartment of the
remote control. (See page 15.)
Page 16
Pages 20, 21
On the remote control
Page 26
Advertisement
Table of Contents
