Replacing the Air Filter
• This projector is equipped with one air filter to ensure the optimal operating condition of the projector.
• The air filter should be exchanged after every 2,000 hours of use.
• Have your nearest Authorized Sharp Industrial LCD Products Dealer or Service Center exchange the filter
(PFILD0110CEZZ).
Front View
Replacing the front air filter
1
Turn off the power.
4
Remove the air filter.
Grasp the air filter tabs between
your fingers and pull it out of
the filter compartment.
• When resetting the filter cover, be sure the filter is securely installed. The power will not turn on unless it is correctly
installed.
E-73
Air filter
2
Turn off the main power
and unplug the power cord.
or
5
Replace the air filter.
Press the air filter firmly into the
filter compartment.
3
Remove the front filter
cover.
Grasp the tab and lift open the
filter cover in the direction of the
arrow.
6
Reset the filter
cover.
Insert the tab on the end of the
filter cover into the filter cover
opening and press the filter
cover into position.