Signal Type (Signal Type Setting); Memory (Storing And Selecting The Adjustment Settings) - Sharp XV-Z10E Operation Manual

Picture Adjustment
Signal Type
In accordance with the input signal from the de-
vice connected to the INPUT 1 terminal on the
projector, "Component" or "RGB" can be se-
lected for the signal type setting.
Select "Signal Type" on the "Picture" menu
and set it to "RGB" or "Component".
Setting the menu screen
Example: "Picture" screen menu for
INPUT 1 (Component) mode
Description of Signal Type Settings
Selectable settings
RGB Set when RGB signals are received.
Set when Component signals are
Component
received.
Note
• You can change the signal type setting on the
"Signal Type" display by pressing
remote control when the INPUT 1 mode is se-
lected.
-44
(Signal Type Setting)
Page 38
Description
on the
Picture Setting
Selecting the Adjustment Settings)
Use this function to store the adjustment settings on
the "Picture" menu. No matter which input mode or
signal type is selected, you can select and apply the
settings you have stored in a memory location.
Select "Picture Setting" on the "Picture" menu and the
memory location where you want to store the settings.
Then adjust the setting items on the "Picture" menu.
Setting the menu screen
Example: "Picture" screen menu for
INPUT 1 (Component) mode
Description of Picture Setting
Selectable settings
Memory 1
Settings of all items (except for
Memory 2
"Signal Type") on the "Picture" menu
Memory 3 can be stored in memory location. The
stored settings can be selected in any
Memory 4
input mode.
Memory 5
Memory OFF Settings on the "Picture" menu for
each input mode can be stored. The
settings stored in "Memory OFF"
cannot be applied when another input
mode is selected.
If you want to apply the stored settings on the "Picture"
menu, select "Picture Setting" on the "Picture" menu and
the memory location where you have stored the settings.
If you want to change the stored settings, select the
memory location for those settings and make settings
on the "Picture" menu.
Note
• A memory location can be selected by pressing
on the remote control. Pressing
changes the memory location in order of
"Memory 1" to "Memory 5" and "Memory OFF".
(Storing and
Page 38
Description