Sharp XV-Z12000 Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. XV-Z12000 - Vision - DLP Projector
  6. Operation manual
Sharp XV-Z12000 Operation Manual

Sharp XV-Z12000 Operation Manual

Hide thumbs Also See for XV-Z12000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Operating Manual
PROJECTOR
PROJECTEUR
PROYECTOR
PROJETOR
Downloaded from ProjectorsManual.com Manuals
XV - Z12000
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACION
MANUAL DE OPERAÇÃO
ENGLISH .............
FRANÇAIS ...........
ESPAÑOL ............
PORTUGUÊS ......
-1 –
-96
-1 –
-95
-1 –
-94
-1 –
-94

Advertisement

Table of Contents
loading

Related Manuals for Sharp XV-Z12000

Summary of Contents for Sharp XV-Z12000

  • Page 1 XV - Z12000 PROJECTOR OPERATION MANUAL PROJECTEUR MODE D’EMPLOI PROYECTOR MANUAL DE OPERACION PROJETOR MANUAL DE OPERAÇÃO ENGLISH ..... -1 – FRANÇAIS ... -1 – ESPAÑOL .... -1 – PORTUGUÊS ..-1 – Downloaded from ProjectorsManual.com Manuals...
  • Page 2 INPUT 4 mode. (Page 35) reasons for prompt warranty registration of your new SHARP Projector, using into the outlet, contact your electrician to replace your Selecting the Picture Position ........46 of the Remote Control ....13 the equipment to be connected for instructions on how obsolete outlet.

  • Page 3: Declaration Of Conformity

    (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430 TEL: 1-800-BE-SHARP (1-800-237-4277) U.S.A. ONLY WARNING: The cooling fan in this projector continues to run for about 90 seconds after the projector enters the standby mode.
  • Page 4 INPUT 4 mode. (Page 35) nt reasons for prompt warranty registration of your new SHARP Projector, using into the outlet, contact your electrician to replace your Selecting the Picture Position ........46 the Remote Control ....13 the equipment to be connected for instructions on how obsolete outlet.

  • Page 5: Table Of Contents

    RS-232C Off Function ..........71 Computer Compatibility Chart ......88 Automatic Power Off Function ......... 72 Troubleshooting ..........89 Selecting the Transmission Speed For SHARP Assistance (U.S.A only) ....90 (RS-232C) ............. 72 Specifications ............ 91 Reversing/Inverting Projected Images .... 73 Dimensions ............92 Displaying the Adjustment Settings ....
  • Page 6 INPUT 4 mode. (Page 35) reasons for prompt warranty registration of your new SHARP Projector, using into the outlet, contact your electrician to replace your Selecting the Picture Position ........46 the Remote Control ....13 the equipment to be connected for instructions on how obsolete outlet.

  • Page 7: Important Safeguards

    IMPORTANT SAFEGUARDS 18. Damage Requiring Service 19. Replacement Parts Unplug this product from the wall outlet and refer When replacement parts are required, be sure the servicing to qualified service personnel under the service technician has used replacement parts following conditions: specified by the manufacturer or have the same a.
  • Page 8 INPUT 4 mode. (Page 35) nt reasons for prompt warranty registration of your new SHARP Projector, using into the outlet, contact your electrician to replace your Selecting the Picture Position ........46 of the Remote Control ....13 the equipment to be connected for instructions on how obsolete outlet.
  • Page 9 How to Access the PDF Operation Manuals of SharpVision Manager PDF operation manuals in several languages for the “SharpVision Manager” theater projec- tor software provided are included in the CD-ROM. To utilize these manuals, you need Adobe Acrobat Reader installed on your PC (Windows or Macintosh). If you have not installed Acro- bat Reader yet, you can install it from the CD-ROM.
  • Page 10 INPUT 4 mode. (Page 35) nt reasons for prompt warranty registration of your new SHARP Projector, using into the outlet, contact your electrician to replace your Selecting the Picture Position ........46 of the Remote Control ....13 the equipment to be connected for instructions on how obsolete outlet.
  • Page 11 Part Names Numbers in refer to the main pages in this operation manual where the topic is explained. Projector (Front and Top View) Adjustment buttons MENU button (", ', \, |) For displaying adjustment For selecting menu items. and setting screens. ENTER button RESIZE button For setting items selected...

  • Page 12: Available Range Of The Remote Control

    Exhaust vent INPUT 4 mode. (Page 35) nt reasons for prompt warranty registration of your new SHARP Projector, using into the outlet, contact your electrician to replace your Selecting the Picture Position ........46 of the Remote Control ....13 the equipment to be connected for instructions on how obsolete outlet.
  • Page 13 Part Names Remote Control (Front View) STANDBY button For putting the projector into the standby mode. ON button For turning the power on. KEYSTONE button For adjusting Keystone Correction or Vertical Size setting. MENU button For displaying adjustment and ENTER button setting screens.
  • Page 14 INPUT 4 mode. (Page 35) reasons for prompt warranty registration of your new SHARP Projector, using into the outlet, contact your electrician to replace your Selecting the Picture Position ........46 the Remote Control ....13 the equipment to be connected for instructions on how obsolete outlet.
  • Page 15 Accessories Supplied accessories Remote control Two “AA” size batteries Power cord RRMCGA216WJSA CACCDA024DE01 Lens cap (attached) CD-ROM Terminal cover PCAPH1056CESA (SharpVision Manager) CCOVA1985CE03 UDSKAA040WJZZ Operation manual (this manual) TINS-A970WJZZ SharpVision Manager operation manual TINS-B097WJZZ Optional accessories 3 RCA to 15-pin D-sub cable (9'10'' (3.0 m)) AN-C3CP DVI to 15-pin D-sub adaptor (7.9'' (20 cm)) AN-A1DV...

  • Page 16: Using The

    Screen S Using the Setup Lens The height of the projected image can be ad- Using the justed within the shift range of the lens by Feet rotating the lens shift dial on the top of the projector. When using a normal Distance from the lens center to Note Screen size (4:3)
  • Page 17 Connecting the Projector to Other Devices Before Connecting Note • Before connecting, be sure to unplug the power cord of the projector from the AC outlet and turn off the devices to be connected. After making all connections, turn on the projector and then the other devices.
  • Page 18 Setup Screen Size and Projection Distance Lens Using the Lens Shift The height of the projected image can be ad- justed within the shift range of the lens by rotating the lens shift dial on the top of the projector. When using a normal Distance from the lens center to Note...
  • Page 19 Connecting the Projector to Other Devices Connecting to Component Video Equipment Using a Component Cable (INPUT 1 or 2) To INPUT 1 or 2 terminals Use a component cable when connecting the component video equipment such as DVD play- ers and DTV* decoders to INPUT 1 or 2 termi- nals.
  • Page 20 Connecting to RGB Video Equipment Using a 5 RCA RGB Cable (INPUT 1 or 2) Use a 5 RCA RGB cable when connecting the To INPUT 1 or 2 terminals RGB video equipment such as DVD players and DTV* decoders to INPUT 1 or 2 terminals. * DTV is the umbrella term used to describe the new digital television system in the United States.
  • Page 21 Connecting the Projector to Other Devices 3 RCA to 15-pin D-sub cable Connecting to Compo- Type: AN-C3CP nent Video Equipment (9'10" (3.0 m)) Optional accessories Using a 3 RCA to 15-pin DVI to 15-pin D-sub adaptor D-sub Cable and the Type: AN-A1DV DVI to 15-pin D-sub (7.9"...
  • Page 22 Setup Screen Size and Projection Distance Lens Using the Lens Shift The height of the projected image can be ad- justed within the shift range of the lens by rotating the lens shift dial on the top of the projector. When using a normal Distance from the lens center to Note...

  • Page 23: Connecting The Projector To A Computer

    Connecting the Projector to Other Devices Connecting the Projector to a Computer Optional Connecting to a Computer DVI to 15-pin D-sub adaptor accessory Type: AN-A1DV (7.9" (20 cm)) Using the DVI to 15-pin D-sub Adaptor and the RGB Cable (INPUT 5) Connect a DVI to 15-pin D-sub adaptor to the projector.
  • Page 24 Setup Screen Size and Projection Distance Lens Using the Lens Shift The height of the projected image can be ad- justed within the shift range of the lens by rotating the lens shift dial on the top of the projector. When using a normal Distance from the lens center to Note...

  • Page 25: Connecting The Thumbscrew Cables

    Connecting the Projector to Other Devices Connecting the thumbscrew cables I Connect the thumbscrew cable making sure that it fits cor- rectly into the terminal. Then, firmly secure the connec- tors by tightening the screws on both sides of the plug. I Do not remove the ferrite core attached to the RGB cable.
  • Page 26 Setup Screen Size and Projection Distance Lens Using the Lens Shift The height of the projected image can be ad- justed within the shift range of the lens by rotating the lens shift dial on the top of the projector. When using a normal Distance from the lens center to Note...

  • Page 27: Using As A Wired Remote Control

    ø3.5 mm minijack cable (commercially available or available as To WIRED REMOTE control Sharp service part QCNWGA038WJPZ) from input terminal the WIRED R/C JACK on the top of the remote control to the WIRED REMOTE control input terminal.

  • Page 28: Using The Adjustment Feet

    Setup Screen Size and Projection Distance Lens Using the Lens Shift The height of the projected image can be ad- justed within the shift range of the lens by rotating the lens shift dial on the top of the projector. When using a normal Distance from the lens center to Note...

  • Page 29: Adjusting The Lens

    Setup Focus ring Zoom knob Adjusting the Lens The image is focused and adjusted to the desired size using the focus ring or zoom knob on the projector. The focus is adjusted by rotat- ing the focus ring. Focus ring Zooming is adjusted by mov- ing the zoom knob.
  • Page 30 Setup Screen Size and Projection Distance Lens Using the Lens Shift The height of the projected image can be ad- justed within the shift range of the lens by rotating the lens shift dial on the top of the projector. When using a normal Distance from the lens center to Note...

  • Page 31: Setting Up The Screen

    Setup Setting up the Screen Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Note • The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
  • Page 32 Setup Screen Size and Projection Distance Lens Using the Lens Shift The height of the projected image can be ad- justed within the shift range of the lens by rotating the lens shift dial on the top of the projector. When using a normal Distance from the lens center to Note...

  • Page 33: Projection From Behind The Screen

    Ceiling-mount setup I It is recommended that you use the optional Sharp ceiling-mount When using the default setting. MOn-screen Display bracket for this installation.
  • Page 34 Basic Operation Downloaded from ProjectorsManual.com Manuals...

  • Page 35: Image Projection

    Image Projection Basic Procedure Power indicator Connect the required external equipment to the projector before operating the following Lamp indicator procedures. Info • The language preset at the factory is English. MENU button If you want to change the on-screen display to another language, reset the language ac- INPUT cording to the procedure on page 36.
  • Page 36 Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select Ò ChromaÓ in the Ò C.M.S.Ó menu \ button | | | | | button...
  • Page 37 Image Projection Selecting the On-screen Display Language • The on-screen display language of the projector can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japa- nese. Press • The menu will be displayed. Press \ or | to select “Lan- guage”.
  • Page 38 Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select Ò ChromaÓ in the Ò C.M.S.Ó menu \ button | | | | | button...

  • Page 39: Keystone Correction And Vertical Size Adjustment

    Keystone Correction and Vertical Size Adjustment Correcting Trapezoidal KEYSTONE button Distortion and Adjust- ENTER button ", ', \, | ing the Vertical Size of buttons UNDO button the Picture This function allows for Keystone (On-screen Trapezoidal Distortion) Correction and the adjustment of the vertical size of the picture.
  • Page 40 Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select Ò ChromaÓ in the Ò C.M.S.Ó menu \ button | | | | | button...

  • Page 41: Menu Bar Items

    Vert Freq 1024 × 768 60 Hz Color –30 Select Setting 800 × 600 75 Hz • –30 • Tint Sharp –30 Vert Freq Resolution 1024 × 768 60 Hz CLR Temp 5000 11000 800 × 600 75 Hz •...
  • Page 42 Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select Ò ChromaÓ in the Ò C.M.S.Ó menu ed Item Description button button b menu.
  • Page 43 Using the Menu Screen This projector has two sets of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following proce- dure. Menu screen for INPUT 1, Menu screen for INPUT 3 or INPUT 2 or INPUT 5 Mode INPUT 4 Mode...
  • Page 44 Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select Ò ChromaÓ in the Ò C.M.S.Ó menu \ button | | | | | button...
  • Page 45 Using the Menu Screen " " " " , ' ' ' , \ \ \ \ \ , | | | | | " buttons Menu Selections MENU button ENTER button (Settings) Press • The menu screen is displayed. Note •...
  • Page 46 Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select Ò ChromaÓ in the Ò C.M.S.Ó menu \ button | | | | | button...
  • Page 47 Select “Picture Position” in the “Pic- ture” menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Selected Position Description Sharp default setting Standard A balanced color image Natural is obtained. A vivid image is obtained.
  • Page 48 Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select “Chroma” in the “C.M.S.” menu \ button | | | | | button...

  • Page 49: Special Settings

    Adjusting the Picture Selecting the C.M.S. Position This function allows you to select the desired color reproduction mode. Select “C.M.S. Position” in the “Picture” menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Note •...
  • Page 50 Description achieved with Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select “Chroma” in the “C.M.S.” menu ed Item Description button button b menu.

  • Page 51: Emphasizing The Contrast

    Adjusting the Picture Emphasizing the Contrast This function emphasizes the bright portions of images to obtain a higher contrast image. Select “White Emph” in the “Specials” menu on the “Picture” menu screen. • “White Emph” is switched “ON” and “OFF” by pressing ➝For operating the menu screen, see pages 42 to 45.
  • Page 52 Description achieved with Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select “Chroma” in the “C.M.S.” menu ed Item Description button button b menu.

  • Page 53: Adjusting The Gamma

    Select “Gamma Position” in the “Gamma” menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Selected Item Description Standard Sharp default setting Black Detail Gives greater depth to darker portions of image. Dynamic A strong, clearly distinguish- Standard...
  • Page 54 Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select “Chroma” in the “C.M.S.” menu \ button | | | | | button...

  • Page 55: Selecting The Target Color

    ➝For operating the menu screen, see pages 42 to 45. Selected Item Description Standard Sharp default setting Film Tone A balanced color image is obtained. Custom 1-2 “Lightness”, “Chroma” and “Hue” can be adjusted for each of the six colors.
  • Page 56 Description achieved with Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select “Chroma” in the “C.M.S.” menu ed Item Description button button b menu.

  • Page 57: Overview Of All Color Settings

    Color Management System (C.M.S.) Resetting User-Defined Color Settings Select “Reset (This Color)” or “Reset (All Colors)” in the “C.M.S.” menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Selected Item Description Reset “Lightness”, “Chroma” and “Hue” (This Color) of the color selected for “Target”...
  • Page 58 Description achieved with Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select “Chroma” in the “C.M.S.” menu ed Item Description button button b menu.

  • Page 59: Adjusting Computer Images

    Adjusting Computer Images Selecting Adjustment Settings Adjustment settings stored in the projector can be easily accessed. Select “Select Setting” in the “Fine Sync” menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Note • If a memory position has not been set, a resolution and frequency setting will not be displayed.
  • Page 60 Description achieved with Auto Sync adjustment. See he menu screen, see enu on the Phase Adjusts horizontal noise (similar to tracking on your VCR). Sharp default setting page 57. Select “Chroma” in the “C.M.S.” menu ed Item Description button button b menu.

  • Page 61: Auto Sync Display Function

    Adjusting Computer Images Auto Sync Display Function Used to set the screen displayed during Auto Sync. Select “Auto Sync Disp” in the “Fine Sync” menu on the menu screen. ➝For operating the menu screen, see pages 42 to 45. Selected Item Description The image set as a back- ground image is projected.
  • Page 62 Revers Selectin This projecto invert the pr These functio Setting th Mode Setting th Selecting the Signal Type This function allows you to select the input signal type RGB or Component for INPUT 1 and D Off Function 2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component, Select Ò...

  • Page 63: Selecting The Picture Display Mode

    Selecting the Picture Display Mode This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose “SIDE BAR”, “SMART STRETCH”, “CINEMA ZOOM”, “STRETCH”, “NORMAL” or “DOT BY DOT” image. RESIZE button Switching the Picture Display Using Different...
  • Page 64 Revers Selectin This projecto invert the pr These functio Setting th Mode Setting th Selecting the Signal Type This function allows you to select the input signal type RGB or Component for INPUT 1 and D Off Function 2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component, Select Ò...
  • Page 65 Selecting the Picture Display Mode COMPUTER NORMAL DOT BY DOT SVGA (800 600) For 4:3 XGA (1024 768) 1024 aspect ratio SXGA (1280 960) 1280 For without SXGA (1280 1024) 1280 4:3 aspect ratio Output screen image Input Signal NORMAL DOT BY DOT 4:3 aspect ratio (640...

  • Page 66: Contrast Mode

    Revers Selectin This projecto invert the pr These functio Selecting the Signal Type Setting the Projection Mode This function allows you to select the input signal type RGB or Component for INPUT 1 and D Off Function 2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component, Select “PRJ Mode”...

  • Page 67: Digital Shift Function

    Digital Shift Function For easier viewing, this function shifts the entire image projected on the screen up or down when projecting 16:9 images from DVD players and DTV* decoders. * DTV is the umbrella term used to describe the new digital television system in the United States. Adjusting the Digital Shift Select “Digi.

  • Page 68: Led Off Function

    Revers Selectin This projecto invert the pr These functio Selecting the Signal Type Setting the Projection Mode This function allows you to select the input signal type RGB or Component for INPUT 1 and D Off Function 2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component, Select “PRJ Mode”...

  • Page 69: Setting On-Screen Display

    Setting On-screen Display This function allows you to turn on or off the on-screen messages. When setting “ Level A” or “ Level B” in “OSD Display”, the input mode display (e.g. INPUT 1) will not appear, even if the INPUT button is pressed. Turning off the On-screen Display Select “OSD Display”...

  • Page 70: Selecting The Signal Type

    Revers Selectin This projecto invert the pr These functio Selecting the Signal Type Setting the Projection Mode This function allows you to select the input signal type RGB or Component for INPUT 1 and D Off Function 2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component, Select “PRJ Mode”...

  • Page 71: Setting The Video System

    Setting the Video System The video input system mode is preset to “Auto”; however, a clear picture from the con- nected audio-visual equipment may not be received, depending on the video signal differ- ence. In that case, switch the video signal. Setting the Video System Select “Video System”...

  • Page 72: Selecting The Economy Mode

    Revers Selectin This projecto invert the pr These functio Selecting the Signal Type Setting the Projection Mode This function allows you to select the input signal type RGB or Component for INPUT 1 and D Off Function 2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component, Select “PRJ Mode”...

  • Page 73: Automatic Power Off Function

    Selecting the Economy Mode Automatic Power Off Function Select “Auto Power Off” in “Economy Mode” under the “Options” menu on the menu screen. • “Auto Power Off” is switched “ON” and “OFF” by pressing ➝For operating the menu screen, see pages 42 to 45.

  • Page 74: Reversing/Inverting Projected Images

    Revers Selectin This projecto invert the pr These functio Selecting the Signal Type Setting the Projection Mode This function allows you to select the input signal type RGB or Component for INPUT 1 and D Off Function 2, or Digital PC RGB, Digital PC Component, Digital Video RGB, Digital Video Component, Select “PRJ Mode”...

  • Page 75: Displaying The Adjustment Settings

    Displaying the Adjustment Settings This function can be used to display all the adjusted settings as a list on the screen. Overview of All Menu Settings Select the “Status” menu on the menu screen and press ➝For operating the menu screen, see pages 42 to 45.

  • Page 76: Appendix

    INPUT 5 CLR TEMP (50 Ð 110) OK OR ERR INPUT 3 DFC OK OR tilative holes should be Sharp remote control signal format STANDBY INPUT 5 DISPLAY R R R R C C A A R R I I...

  • Page 77: Maintenance

    Maintenance Cleaning the projector Cleaning the lens I Be sure to unplug the power cord before clean- I Use a commercially available blower or lens ing the projector. cleaning paper (for glasses and camera lenses) I The cabinet as well as the operation panel is for cleaning the lens.

  • Page 78: Cleaning The Ventilative Holes

    INPUT 5 CLR TEMP (50 Ð 110) OK OR ERR INPUT 3 DFC OK OR tilative holes should be Sharp remote control signal format STANDBY INPUT 5 DISPLAY R R R R C C A A R R I I...

  • Page 79: Maintenance Indicators

    Maintenance Indicators I The warning lights on the projector indicate problems inside the projector. I If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter the standby mode. After the projector has entered the standby mode, follow the procedures given below.
  • Page 80 INPUT 5 CLR TEMP (50 Ð 110) OK OR ERR INPUT 3 DFC OK OR tilative holes should be Sharp remote control signal format STANDBY INPUT 5 DISPLAY R R R R C C A A R R I I...

  • Page 81: Regarding The Lamp

    Authorized SharpVision Service Center or Dealer. For the name of the nearest Authorized SharpVision Service Center or Dealer, please call toll-free: 1-877-DTV-SHARP (1-877-388-7427). U.S.A. ONLY Caution Concerning the Lamp I This projector utilizes a pressurized mercury lamp.

  • Page 82: Removing And Installing The Lamp Unit

    INPUT 5 CLR TEMP (50 Ð 110) OK OR ERR INPUT 3 DFC OK OR tilative holes should be Sharp remote control signal format STANDBY INPUT 5 DISPLAY R R R R C C A A R R I I...

  • Page 83: Resetting The Lamp Timer

    Regarding the Lamp Remove the lamp unit. • Loosen the securing screws from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow. Insert the new lamp unit. • Press the lamp unit firmly into the lamp unit compartment.

  • Page 84: Connecting Pin Assignments

    Connecting Pin Assignments DVI-I (INPUT 5 / DIGITAL INPUT) port: 29 pin connector • DVI Digital INPUT Pin No. Signal Pin No. Signal T.M.D.S data 2– Hot plug detection T.M.D.S data 2+ T.M.D.S data 0– T.M.D.S data 2 shield T.M.D.S data 0+ 24 23 18 17 •...

  • Page 85: (Rs-232C) Specifications And Command Settings

    (RS-232C) Specifications and Command Settings PC control A computer can be used to control the projector by connecting an RS-232C cable (null modem, cross type, commercially available) to the projector. (See page 25 for connection.) Communication conditions Set the serial port settings of the computer to match that of the table. Signal format: Conforms to RS-232C standard.
  • Page 86 OK OR ERR C5 C6 C10 C11 C5 C6 C10 C11 ing the Lamp Unit INPUT 1 SHARP (–30 – +30) OK OR ERR INPUT 3 SHARP (–30 – +30) OK OR ERR RESIZE INPUT 1 CLR TEMP (50 – 110) OK OR ERR INPUT 3 CLR TEMP (50 –...
  • Page 87 (RS-232C) Specifications and Command Settings CONTROL CONTENTS COMMAND PARAMETER RETURN CONTROL CONTENTS COMMAND PARAMETER RETURN INPUT 4 GAMMA POSITION : STANDARD OK OR ERR RGB INPUT DISPLAY OK OR ERR INPUT 4 GAMMA POSITION : BLACK DETAIL OK OR ERR RGB ADJUSTMENT RESET OK OR ERR INPUT 4 GAMMA POSITION : DYNAMIC GAMMA...

  • Page 88: Wired Remote Control Terminal Specifications

    INPUT 5 CLR TEMP (50 Ð 110) OK OR ERR INPUT 3 DFC OK OR tilative holes should be Sharp remote control signal format STANDBY INPUT 5 DISPLAY R R R R C C A A R R I I...

  • Page 89: Computer Compatibility Chart

    Computer Compatibility Chart Computer • Multiple signal support Horizontal Frequency: 15–81 kHz Vertical Frequency: 43–100 Hz, Pixel Clock: 12–120 MHz • Compatible with sync on green and composite sync signals • SXGA compatible in advanced intelligent compression • AICS (Advanced Intelligent Compression and Expansion System) resizing technology The following is a list of modes that conform to VESA.

  • Page 90: Troubleshooting

    • The selected “Signal Type” is wrong. Clock satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any Phase • The video signal format of the video equipment is not set correctly.

  • Page 91: For Sharp Assistance (U.s.a Only)

    If you encounter any problems during setup or operation of this projector, first refer to the “Trouble- shooting” section on pages 89 and 90. If this operation manual does not answer your question, please call toll free 1-877-DTV-SHARP (1-877-388-7427) for further assistance. Or, send us an e- mail at lcdsupport@sharpsec.com .

  • Page 92: Specifications

    Lens cap (PCAPH1056CESA), SharpVision Manager Software CD-ROM (UDSKAA040WJZZ), Projector operation manual (TINS-A970WJZZ), SharpVision Manager operation manual (TINS-B097WJZZ) This SHARP projector uses a DMD Chip. This very sophis- This unit has some inactive pixels within acceptable toler- ticated panel contains 921,600 pixels. As with any high tech- ances which may result in inactive dots on the picture screen.

  • Page 93: Dimensions

    Dimensions Units: inches (mm) Rear View Side View Top View Side View Front View (475) Bottom View Downloaded from ProjectorsManual.com Manuals...

  • Page 94: Glossary

    The selected “Signal Type” is wrong. Clock satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any Phase Clock adjustment is used to adjust vertical noise The video signal format of the video equipment is not set correctly.

  • Page 95: Index

    Index 2D Progressive ............ 49 Lamp ..............80 3D Progressive ............ 49 Lamp indicator ............. 78 Lens cap .............. 10 AC socket ............16 Lens shift dial ............29 Adjusting Computer Images ........ 57 LIGHT button ............12 Adjusting the Lens ..........28 Lightness .............
  • Page 96 The selected “Signal Type” is wrong. Clock satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any Phase Clock adjustment is used to adjust vertical noise The video signal format of the video equipment is not set correctly.

  • Page 97: Limited Warranty

    (b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized Service Centres or Sharp’s Authorized Servicing Dealers. (c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to head cleaning tapes and chemical cleaning agents.

Table of Contents