Table of Contents
Advertisement
Computer Image Adjustment
Auto Sync
ment)
Used to automatically adjust a computer image.
Select "Auto Sync" on the "Fine Sync" menu
and set it to "
"(ON) or "
Setting the menu screen
Example: "Fine Sync" menu screen for
INPUT 1 (RGB) mode
Description of Auto Sync Adjustment
Selectable Settings
Auto Sync adjustment will occur when
the projector is turned on or when the
ON
input signals are switched, when
connected to a computer.
Auto Sync adjustment is not automati-
OFF
cally performed.
Note
• Auto Sync adjustment is also performed by
pressing
on the remote control.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page 45.)
• Auto Sync adjustment is performed when "Sig-
nal Type" is set to "RGB".
-46
(Auto Sync Adjust-
"(OFF).
Page
38
Description
Signal Info
Input Signal)
Select "Signal Info" on the "Fine Sync" menu
to check the current input signal informa-
tion.
Checking the menu screen
Example: "Fine Sync" menu screen for
INPUT 1 (RGB) mode
Note
• The projector will display the number of
scanned lines available from audio-visual
equipment such as a DVD player or Digital
Video.
(Checking the
Page
38
Advertisement
Table of Contents
