Connecting The Projector To Other Devices; Before Connecting - Sharp XV-Z10E Operation Manual

Connecting the Projector to Other Devices

Before Connecting

Note
• Before connecting, be sure to unplug the power cord of the projector from the wall outlet and turn off the
devices to be connected. After making all connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
• Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
Video equipmeent or audio-visual equipment:
I A VCR or other audio-visual equipment (See page
21.)
I A DVD player or DTV
*
DTV is the umbrella term used to describe the new
digital television system in the United States.
A computer using:
I An RGB cable (commercially available or sold sepa-
rately) (See page 24.)
I An RS-232C cable (null modem, cross type, commer-
cially available) for controlling the projector (See
page 25.)
Connecting the thumbscrew cables
I Connect the thumbscrew cable making sure that
it fits correctly into the terminal. Then, firmly se-
cure the connectors by tightening the screws on
both sides of the plug.
*
decoder (See page 22.)
-19