Table of Contents
Advertisement
Image Projection
Turning off the Sound
Temporarily
Press
on the remote control to tem-
porarily turn off the sound.
Note
• Pressing
again will turn the sound back
on.
Turning the Power off
the Projector into the Standby Mode)
1
Press
on the remote control, then
press that button again while the
confirmation message is dis-
played, to put the projector into
the standby mode.
Note
• If you accidentally pressed
and do not want to put the projec-
tor into the standby mode, wait until the
confirmation message disappears.
2
Unplug the power cord from the wall
outlet after the cooling fan stops.
Info
• Do not unplug the power cord during pro-
jection or cooling fan operation. The cool-
ing fan in this projector continues to run
for about 90 seconds after the projector en-
ters the standby mode. This can cause
damage due to rise in internal temperature,
as the cooling fan also stops.
-28
(Putting
on the projector or
or
"On-screen Display
STANDBY
button
"On-screen Display
MUTE button
Advertisement
Table of Contents
