Connecting To Video Equipment - Sharp Notevision XR-20XA Operation Manual

Connecting to Video Equipment

The projector is equipped with input terminals that support component, S-video, and video signals.
See the illustration below to connect with the audio-visual equipment.
The image quality is highest in the order of the component signal, the S-video signal and the video
signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/
COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection.
When using a 3 RCA (Component) to 15-pin D-sub cable (INPUT1 or INPUT2)
To audio output terminal
To component output (Y, C
ø3.5 mm minijack to RCA
audio cable (commercially
available)
When using an S-video cable (INPUT3)
To audio output terminal
To S-video output terminal
RCA audio cable (com-
mercially available)
24
/P , C
B B
DVD, etc.
3 RCA (Component)
to 15-pin D-sub cable
(optional: AN-C3CP2)
DVD, etc.
S-video cable
(commercially available)
/P ) terminal
R R
To INPUT1
To AUDIO
terminal
(INPUT1, 2)
To AUDIO
To INPUT3
(INPUT3, 4)
terminal
terminal
terminal
L
R