Table of Contents
Advertisement
Conne
When connecting a computer, ensure that it is the last device to be turned on after all the
connections are made.
Ensure that you have read the operation manuals of the devices to be connected before making
connections.
To audio output terminal
To RGB output terminal
cting to Video Equipment
cting, ensure that the power cord of the projector is unplugged from the AC
n off the devices to be connected. After making all connections, turn on the
and then the other devices.
s equipped with input terminals that support component, S-video, and video signals.
ation below to connect with the audio-visual equipment.
ality is highest in the order of the component signal, the S-video signal and the video
audio-visual equipment has a component output terminal, use the COMPUTER/
* ø3.5 mm stereo or
terminal (INPUT1 or INPUT 2) on the projector for video connection.
mono audio cable
(commercially
ecting to equipment with component output terminal (INPUT1 or
available or
available as Sharp
service part
QCNWGA038WJPZ)
Note
ut
To component output
• See page 55 "Computer Compatibility Chart" for a list of computer signals compatible with the projec-
(Y, C
/P
, C
/P
) terminal
B
B
R
tor. Use with computer signals other than those listed may cause some of the functions to not work.
R
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your near-
DVD, etc.
est Macintosh Dealer.
• Depending on the computer you are using, an image may not be projected unless the
computer's external output port is switched on. (e.g. Press "Fn" and "F5" keys simultaneously
when using a SHARP notebook computer). Refer to the specific instructions in your computer's
operation manual to enable your computer's external output port.
ack to RCA
commercially
e when you want to
nd from the projector's
Downloaded from ProjectorsManual.com Manuals
Computer
RGB Cable
(commercially available)
* When using the ø3.5 mm mono audio cable, the volume level will be half of
when using the ø3.5 mm stereo audio cable.
Supplied
accessory
To INPUT1 terminal
Component cable
(commercially
available)
Supplied
accessory
To INPUT1 terminal
3 RCA to 15-pin
D-sub adaptor
To AUDIO (INPUT1, 2)
terminal
3 RCA to 15-
pin D-sub
adaptor
To AUDIO
(INPUT1, 2)
terminal
2
Advertisement
Table of Contents
Troubleshooting
