Multi-Screen Color Adjustment - Epson EB G5200WNL User Manual

Multi-screen Color Adjustment

You can match the color of projected images when two or more
projectors are being used to display images near each other, or when
you use the multi-screen feature to project from one source (one
image) as described in the EasyMP Operation Guide. For each screen,
you can set five levels of brightness and color correction.
1. Before starting, you may want to assign a numeric ID to each
projector. This lets you use the remote control to select the
projector you want to adjust. See page 57 for instructions.
To match the display colors as closely as possible, make sure that
all the projectors are set to the same color mode before starting.
See page 96 for instructions.
2. Press the button on the remote control. You see the
Menu
projector's menu screen.
3. Press the button, highlight the
Menu
.
Enter
4. Select
Multi-screen
5. Start by setting the
Then use
Brightness Correct
the lighter one. Press
6. Next, adjust the brightness of Level 5 for the same two projectors.
Match the brighter projector to the darker one.
7. Adjust and match the brightness of Levels 2, 3, and 4.
8. Adjust and match the G/R color correction for all levels. Then
adjust and match the B/Y correction for all levels.
9. If you are using three or more projectors, repeat steps 5 through 8
to match projector 3 to projector 2, then match projector 4 to
projector 3, and so on.
Extended
and press .
Enter
to
Adjustment Level
to match the darker projector to
to see the effects of your adjustments.
Enter
menu, and press
for two projectors.
1
Fine-Tuning the Projector
note
If you use two or more
projectors side-by-side,
exhaust from adjacent
projectors might cause
overheating. Leave at least
2 feet (60 centimeters) of
space between projectors.
109