Checking Projector Status
If your projector isn't working correctly, first turn it off and unplug it.
Then plug the power cord back in and turn on the projector. If this
doesn't solve the problem, check the lights on top of the projector.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector's status.
Temperature light
Lamp light
Power light
Refer to the following table for a complete description of the
projector's status lights:
Status lights
Light
Status
Orange
Flashing green
Green
Red or
flashing red
Wireless LAN status light
(G5150NL and G5350NL only)
Description
The projector is in sleep or standby mode. You can unplug it or press the
P
power button to turn it on.
The projector is warming up. Wait for the image to appear.
The projector is operating normally.
There is a problem with the projector. Check the other two lights and the
information on page 136 to diagnose the problem.
Solving Problems
135