Epson EB G5200WNL User Manual page 75

12. Click the
Wireless Networks
may need to enable your wireless card or adapter by clicking
to access the device settings; then follow any
Configure
instructions on the screen to enable the device.)
You see a screen like this:
13. Verify that you've enabled your computer's connection to the
access point. It should be listed with the small
indicating a connection.
If it's not listed, click
point.
14. When you're done making settings, click
box.
Now you're ready to connect to the projector. See "Projecting Over a
Network" on page 90.
tab. (If you don't see this tab, you
and type the name of your access
Configure
OK
Preparing the Projector to Present Through a Network
icon next to it,
to close the dialog
75