Epson EB G5200WNL User Manual page 73

5. Check your wireless card's or adapter's device settings.
(Depending on the type of card or adapter you're using, some of
the settings may be different than those listed here.)
■ Set the Network Type to
■ Set the SSID to match the name assigned to the access point
(which should also match the projector's SSID).
■ Make sure Encryption is
encryption on the projector.
6. Click the
General
adapter is enabled.
7. When you're done, click
box.
8. Right-click the
Wireless Network Connection
select . You see this screen:
Properties
Infrastructure
if you have not set up
Disabled
tab and make sure that your wireless card or
to close the wireless properties dialog
OK
Preparing the Projector to Present Through a Network
.
icon again and
73