Powerlite Pro G5200Wnl - Epson EB G5200WNL User Manual

6. Do one of the following:
If your network assigns addresses automatically, turn on the
■
setting.
DHCP
■ If your network does not assign addresses automatically, turn
off and enter the projector's
DHCP
, and
Mask Gateway Address
To enter numbers, use the
control to highlight the number you want to input, then press
the button.
Enter
7. When you're done making all necessary changes, select
select
Setup complete
want to save the changes. Press

PowerLite Pro G5200WNL

1. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable. Connect the
cable to the port on the projector. See page 37.
LAN
2. Turn on the projector.
3. Press the button on the remote control, select the
Menu
menu, then press
Network
4. Choose
Wired LAN
IP Address
.
pointer button on the remote
, and then select
Yes
to exit.
Menu
. You see the following screen:
Enter
and press .
Enter
,
Subnet
,
Return
to confirm that you
note
If you're a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you're monitoring.
Managing Projectors
115