note
If you're a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you're monitoring.
note
You can also set e-mail alerts
from EMP Monitor (see the
EMP Monitor Operation
Guide for more
information).
Managing Projectors
116
5. Do one of the following:
If your network assigns addresses automatically, turn on the
■
setting.
DHCP
If your network does not assign addresses automatically, turn
■
off
and enter the projector's
DHCP
, and
Mask
Gateway Address
To enter numbers, use the
control to highlight the number you want to input, then press
.
Enter
6. When you're done making all necessary changes, select
, and then
Setup complete
the changes. Press
Using Projector E-mail Alerts
When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
PowerLite Pro G5150NL and G5350NL
1. Press the
button on the remote control, select the
Menu
menu, then press
Network
2. Choose
Network Configuration
IP Address
.
pointer button on the remote
to confirm that you want to save
Yes
to exit.
Menu
.
Enter
and press
,
Subnet
,
Return
.
Enter