You see this screen:
4. Make sure
is selected for the Connection mode. If not, use
Quick
the
pointer button on the remote control to highlight
then press
to select it.
Enter
5. If your network is using 802.11a, use the
the remote control to highlight
select it.
6. If your computer's network card supports an SSID (or ESSID)
name (see page 67), highlight the
enter a name.
Press the
pointer button to select individual letters; then press
to input a character. To add a blank space or to navigate
Enter
backward and forward through the input text, highlight the
arrows and press
Enter
letters, highlight the option and press
highlight
and press
Finish
pointer button on
, then press
802.11a
text box, press
SSID
. To toggle symbol settings or capital
. When you're done,
Enter
.
Enter
Preparing the Projector to Present Through a Network
,
Quick
note
If you are using a
to
Enter
WPS-compatible access
point, see page 79 for
connection information.
, and
Enter
63