Managing Projectors
114
Connecting to a Wired Network
Follow these steps to connect the projector to your network and
configure it with an IP address:
PowerLite Pro G5150NL and G5350NL
1. Connect the projector to your network using a commercially
available 100BaseTX or 10BaseT network cable. Connect the
cable to the
port on the projector. See page 37.
LAN
2. Turn on the projector.
3. Press the
button on the remote control, select the
Menu
menu, then press
Network
4. Choose
Network Configuration
5. Choose
Wired LAN
screen:
.
Enter
and press
and press
. You see the following
Enter
.
Enter