Connecting A Network Cable; Turning The Projector On And Off - Epson EB G5200WNL User Manual

Epson multimedia projector user's guide
Hide thumbs Also See for EB G5200WNL:
Table of Contents

Advertisement

The indicator light above the slot comes on or flashes when the SD
card is in use. Do not remove the card when the light is flashing.
To remove the card, gently press the inserted SD card. The card
springs out, and you can then remove the card by pulling it straight
out.

Connecting a Network Cable

To connect the projector to your local area network (LAN), use a
commercially available 100BaseTX or 10BaseT network cable. To
ensure proper data transmission, use a Category 5 shielded cable or
better.
Connect the cable to the projector and your network port as shown:
LAN port

Turning the Projector On and Off

Turn on any connected computer or video equipment before starting
the projector so it can automatically detect and display the image
source. If you turn on the projector first, or have multiple pieces of
connected equipment, you may have to select the image source
manually (see page 42).
caution
Do not remove the card
when the indicator light is
flashing, or you may damage
the card or projector.
Setting Up the Projector
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerlite pro g5200wPowerlite pro g5350G5150 - wireless lan module 802.11a/b/gV11h273920V11h298920Powerlite pro g5150nl ... Show all

Table of Contents