Saving And Recalling Computer Settings - Epson PowerLite 8200i User Manual

note
If you want to overwrite an
existing setting, move to the
setting and press .
Enter
When the confirmation
message appears, choose
Yes
and press .
Enter
Fine-tuning the Projector
66

Saving and Recalling Computer Settings

When you are projecting from a computer source, you can save and
recall settings (resolution, tracking, sync signal, and position) for up to
five different sessions. This is useful if you use more than one
computer with the projector; you can save the settings for each one
and recall them when necessary. Follow these steps to save the current
session settings:
1. Press the button on the control panel or remote control to
Menu
display the Main menu.
2. Press to select the Video menu.
Enter
3. Use the down arrow (control panel) or
down to the
Preset
Selection menu with the current resolution setting displayed.
4. Press to assign it to the next available number.
Enter
5. Press again. When you see the "Overwrite?" prompt, select
Enter
or and press
Yes No
6. Press to return to the Video menu.
Esc
When you want to use a saved setting, press the
remote control. You see the setting for session number 1 displayed in
yellow at the top right of the screen. To select another number, press
the button again until the setting number you want is
Preset
displayed. The projector will reset itself according to the selected
setting.
Enter
option and press
Enter
.
Enter
button to move
. You see the Preset
button on the
Preset