Saving And Recalling Computer Settings - Epson PowerLite 600p User Manual

Fine-tuning the Projector
48

Saving and Recalling Computer Settings

When you are projecting from an analog computer source, you can
save and recall settings (resolution, tracking, sync signal, and position)
in up to five different combinations. This is useful if you use more
than one computer with the projector; you can save the settings for
each one and recall them when necessary. Follow these steps to save
the projector's current settings:
1. Press the button to display the Main menu.
Menu
2. Press the button to select the Video menu.
3. Use the
Sync–
(remote control) to move down to the
4. Press . You see the Preset Selection menu with the current
resolution setting displayed.
5. Use the
Sync–
(remote control) to select the number to which you want to assign
the current settings.
6. Press . If you see an
press .
7. Press or
Esc Menu
When you want to use a saved setting, press the
remote control. You see the selected setting displayed on the screen.
To select another number, press the
setting number you want is displayed. The projector resets itself
according to the selected setting.
button (control panel) or the
Preset
button (control panel) or the
prompt, select
Overwrite?
to exit.
button again until the
Preset
button
option.
button
and
Yes
button on the
Preset