Epson PowerLite 8200i User Manual page 91

See the information below for what to do when you see these warning
lights or encounter other specific problems with the projector.
The power light is flashing orange and you cannot turn
on the projector.
The lamp is cooling down. Wait until the light turns off and then
press the button to turn on the projector.
Power
The power light does not come on.
Press the button to turn off the projector, make sure the power
Power
cable is connected securely to the power outlet and the projector, and
press the button again. Try removing and reseating the lamp.
Power
The power light is red and the projector is turned off.
Power to the projector has been shut off because of an internal
problem. Unplug the projector and contact EPSON.
Projected images get darker or start to deteriorate, or the
lamp warning light is flashing red or orange.
The lamp is burned out or is nearing the end of its life and needs to be
replaced. See Chapter 4 for instructions.
The temperature light is red.
The projector is overheating, which turns the lamp off
I
automatically. Let the projector cool for a few minutes, then turn
it back on. Make sure there is plenty of space around and under
the projector for ventilation. If it continues to overheat, you may
need to change the air filter.
I The air filter may be clogged. Clean it as described in Chapter 4
and then let the projector cool for awhile. If this does not work,
you may need to change the air filter. See Chapter 4.
I If the projector continues to overheat after you clean the air filter,
the problem may be caused by damage to the cooling fan or
internal circuits. Contact EPSON for help.
warning
Except as specifically
explained in this
User's Guide, do not
attempt to service this
product yourself.
Solving Problems
85