Saving Settings To A Computer - Epson EB-770F User Manual

3. Press and hold the Menu button on the control panel or remote control as you connect the power
cord to the projector's power inlet.
4. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release
the Menu button.
The lights flash to indicate that settings are transferring to the projector. When the lights stop
flashing, the On/Standby light turns blue and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the flash drive.
Parent topic:
Related references
Projector Light Status

Saving Settings to a Computer

You can save the projector settings you want to transfer to a computer.
Your computer must be running one of the following operating systems:
• Windows 10
• Windows 11
• macOS 10.13.x or later
1. Turn off the projector and unplug the power cord from the projector's power inlet.
Copying Menu Settings Between Projectors
190