I
Tint (video only)
Adjusts the balance of green to magenta in the image.
I
Sharpness
I
Gamma
Choose
Dynamic
(such as charts or graphs), or
images.
I
Resolution (computer images only)
Leave this setting at
video signal automatically. If the projector is unable to sync
up with the computer, select
settings.
I
Video Signal
Leave this setting at
system (select
4. When the image is set correctly, press
automatically saved.
Saving and Recalling Computer Settings
When you are projecting from a computer source, you can save and
recall settings (resolution, tracking, sync signal, and position) for up to
five different sessions. This is useful if you use more than one
computer with the projector; you can save the settings for each one
and recall them when necessary. Follow these steps to save the current
session settings:
1. Press the
button to display the Main menu.
Menu
2. Press
to select the Video menu.
Enter
3. Use the down arrow (control panel) or
control) to move down to the
see the Preset Selection menu with the current resolution setting
displayed.
for computer images with bright colors
Natural
to allow the projector to detect the
Auto
Manual
unless you are using a 60-hertz PAL
Auto
).
PAL60
Esc
Enter
option and press
Preset
to enhance video
and choose from 32
. Your settings are
button (remote
. You
Enter
Fine-tuning the Projector
45