Using The Projector; Turning On Your Equipment - Epson PowerLite 8200i User Manual

2

Using the Projector

O
nce you have connected your projector to your other equipment
(as described in Chapter 1), you're ready to turn it on, adjust the
image, and give your presentation. This chapter covers the following:
Turning on the projector and other equipment
I
I Adjusting the image
Using the remote control
I
I Zooming your image with the remote
I Controlling the projector
Drawing on the screen
I
I What to do when the lights flash
Using the on-screen help
I
Shutting down the projector
I

Turning On Your Equipment

Make sure your projector and other equipment are set up and
connected correctly, as described in Chapter 1. Then turn on your
projector, as described below, followed by any equipment you've
connected to it. You can turn on your computer and video equipment
in any order, but if more than one computer or video source is
connected, you may have to switch to the desired source, as described
on page 51.
Using the Projector
39