Assigning The Image To The No-Signal Message And/Or A/V Mute Button - Epson PowerLite 8200i User Manual

Fine-tuning the Projector
74
Assigning the Image to the No-Signal Message
and/or A/V Mute Button
After your image is saved, you can set it up as the no-signal message
and/or the screen that's displayed when you press the
button.
1. Press the button on the control panel or remote control to
Menu
display the Main menu (if not already displayed).
2. Select the
Setting
control panel or remote control.
3. Press the down arrow (control panel) or press down on the
button (remote control) to highlight
4. Press the right arrow or use the
sets your image as the screen displayed when the projector is not
receiving a signal.
5. If you want to set up your image as the A/V mute, use the down
arrow or button to move down to the
Enter
and select .
Logo
6. Press or the
Esc Menu
Now you can press the
remote control to display the user logo or image. Press it again to turn
off the logo.
menu and then press the
No-Signal Msg
button to select
Enter
button.
button on the control panel or the
A/V Mute
A/V Mute
button on the
Enter
Enter
.
. This
Logo
option
A/V Mute