Using The Cursor/Stamp Arrow; Drawing Boxes - Epson PowerLite 8200i User Manual

note
You can use the projector's
Effect menu to select
different cursor stamps.
See page 68.
note
You can use the projector's
Effect menu to change the
color and shape of the box.
See page 68.
Using the Projector
54

Using the Cursor/Stamp Arrow

You can use the cursor stamp tool as a pointer and place cursor stamps
anywhere on your screen. You can choose from three types of stamps.
1. To activate the cursor stamp, press button
control. A green pointer appears in the upper left corner of the
screen. To try a different stamp, press
the third one.
2. Press the side of the
you want it.
3. To "paste" the pointer on the screen, press down in the center of
the button. You can then continue to work with another
Enter
pointer, moving it around the screen or pasting it wherever you
want.
4. To erase the pointers pasted on the screen, press button
5. To cancel the cursor stamp feature, press

Drawing Boxes

You can draw boxes on the screen to outline areas of your presentation
or video.
1. To activate the box tool, press button
small pink square appears in the upper left corner of the screen.
This is the "box-drawing" tool.
2. Press the side of the
want to begin drawing the box.
3. Press down in the center of the
mark on the screen; this defines one corner of the box.
4. Press the side of the
want the opposite corner of the box to be.
5. Press down in the center of the
outlined on the screen.
You can continue placing boxes on the screen by repeating steps 2
through 5.
again. Press
1
button to move the pointer wherever
Enter
Esc
on the remote control. A
2
button to move the square where you
Enter
button. You see a corner
Enter
button to drag the square to where you
Enter
button. You see the box
Enter
on the remote
1
again to see
1
.
5
.