Connecting A Component Video Source - Epson PowerLite 6100i User Manual

Connecting a Component Video Source

1. Locate a component-to-VGA video cable (you can purchase one
from Epson; see page 12).
2. Connect the RCA end of the cable to your player and the VGA
end to the
Computer1
3. If you want to play sound through the projector, see page 25 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 2
for instructions on turning on the projector and adjusting the
image.
5. Once the projector is turned on, enter the projector's Signal menu
and make sure Computer1 is set to
port on the projector.
; see page 54.
Auto
Setting Up the Projector
19