note
You can also use the buttons
on the projector to access the
menu system:
Menu
Esc
button
button
Arrow buttons
Enter button
Configuring the Projector
50
Using the Menu System
You can use the remote control (or the projector's control panel) to
access the menus and change settings. Follow these steps:
1. To display the menu screen, press the
You see a menu screen similar to the one shown below (the
settings may differ from those shown here, depending on the
selected input source):
Menu list
The menus are listed on the left, and the options available for the
highlighted menu are shown on the right.
2. Use the
pointer button on the remote control (or the arrow
buttons on the projector) to scroll through the menu list. When
you've highlighted the desired menu, press the
select it.
3. Once you've selected the menu, use the
scroll through the list of options. (Some of the options may be
grayed out or unavailable, depending on the selected source.)
button.
Menu
Options
button to
Enter
pointer button to