Using The Projector's Security Features - Epson PowerLite 6100i User Manual

note
The air filter usage timer
doesn't register until you've
used the filter for at least
10 hours.
Configuring the Projector
64
■
Air Filter
Displays type of air filter and the number of hours it has
been used.
■
Source
Displays the input source currently being used.
■
Input Signal
Displays the input signal currently being used.
(computer, RGB video, and component video)
■ Resolution
Displays the input resolution currently being used.
■ Refresh Rate
Displays the refresh rate.
(computer, RGB video, and component video)
■ Sync Info
Displays information that may be needed by a service
technician.
■
Video Signal
Displays the video signal format currently being used.

Using the Projector's Security Features

To prevent unauthorized use of the projector, you can do the
following:
■ Create an identifying user logo that is displayed at startup and/or
when the A/V Mute button is pressed
■ Assign a password that's required to be entered every time the
projector is turned on; this can be disabled for a set period of time
if you want to loan the projector to someone
Disable the projector's buttons; this is useful, for example, if
■
you're projecting in a classroom and you want to ensure that no
one touches the projector's buttons while you're using the remote
control
(computer, RGB video, and component video)
(computer, RGB video, and component video)
(composite and S-Video)