Projecting
34
Adjusting the Image
Once you see your image, you need to make certain adjustments:
■
To focus or zoom your image, see below.
■
If the image is too high or too low, you can reposition it. See
page 35.
■
If the image isn't square, see page 36.
If a computer image displays incorrectly, see page 38.
■
If you need to fine-tune the image and/or sound, see Chapter 4.
Focusing and Zooming Your Image
Open the lens access door, then do the following:
■
Use the
ring on the projector to sharpen the image.
Focus
Use the
ring on the projector to reduce or enlarge the
■
Zoom
image. Move the tab toward the
toward the
to decrease it.
T
If the image still isn't large enough, you may need to move the
projector farther away from the screen. You can also use the
buttons on the remote control to zoom in on a portion of the image.
See page 45 for instructions.
to increase the size, and
W
Focus ring
Zoom ring
E-Zoom