Monitoring Your Projectors - Epson PowerLite 6100i User Manual
Epson powerlite 6100i multimedia projector user's guide
Hide thumbs
Also See for PowerLite 6100i:
- Specifications (2 pages) ,
- Quick setup (2 pages) ,
- Parts list (1 page)
Table of Contents
Advertisement
5. Enter a Display name, select a Parent group, if necessary, enter a
Monitor Password, if necessary, and a Description for the
projector. Then click the
To register additional projectors with EMP Monitor, repeat steps
2 through 5.
6. When you're done adding projectors, click
You see a screen with a list of all registered projectors:
Monitoring Your Projectors
The EMP Monitor screen lets you monitor your projectors using the
Status, Video Source, and Error icons shown below. This lets you see
which projectors are currently being used, from which source (or port)
they are projecting an image, and if a problem occurs.
For detailed status information, right-click the projector in question
and click
.
Property
button.
Register
Cancel
Managing the Projector from a Remote Computer
.
note
To delete a projector from
the list, right-click the
projector name, and click
Delete
note
To monitor a projector
when it's in standby mode
(plugged in but not turned
on), you must select
Network On
Standby Mode
the projector's menu system
(see page 59).
.
as the
setting in
79
Advertisement
Table of Contents
