Resetting The Lamp Timer; Transporting The Projector - Epson PowerLite 6100i User Manual
Epson powerlite 6100i multimedia projector user's guide
Hide thumbs
Also See for PowerLite 6100i:
- Specifications (2 pages) ,
- Quick setup (2 pages) ,
- Parts list (1 page)
Table of Contents
Advertisement
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector's menu.
1. Plug the projector in and turn it on.
2. Press the
button on the remote control, select
Menu
from the Reset menu, then press
Hours
3. When you see the confirmation message, select
.
Enter
4. When you're finished, press
Transporting the Projector
The projector contains many glass and precision parts. Follow these
guidelines to prevent injury or damage:
■
When hand-carrying the projector, you should use the handle to
lift it only a short distance (for example, to set it on a table).
■
When shipping the projector for repairs, use the original
packaging material if possible. If you do not have the original
packaging, use equivalent materials, placing plenty of cushioning
around the projector.
■
When transporting the projector a long distance, first place it in a
hard-shell shipping case, and then pack it in a firm box, placing
cushioning around the case.
.
Enter
Yes
to exit the menu system.
Menu
Reset Lamp
, then press
note
The lamp usage timer shows
0H until you've used the
lamp for at least 10 hours.
note
Epson shall not be liable for
any damages incurred
during transportation.
Maintaining the Projector
95
Advertisement
Table of Contents
