Restoring The Default Settings - Epson PowerLite 6100i User Manual

4. After highlighting the option you want to adjust, use the
pointer button to change the setting. In some cases, you may
have to press the
Enter
the setting.
Press the left or right side of the
■
a slider bar.
To select from two or more settings, use the
■
button to highlight the desired setting, then press
5. After changing the settings, press the
changes and return to the previous menu (or press it repeatedly to
exit the menu system).
You can also press the

Restoring the Default Settings

You can use the menu system's Reset options to restore the factory-
default settings for:
■ all the settings listed in a specific menu
all the settings in all menus
■
To restore the settings in a specific menu, enter the menu whose
settings you want to change, select
(The example below shows how to reset the Image menu.)
Reset
Reset All
To restore all the projector settings to their factory-default values,
select the menu, then select
Reset
button to see a sub-screen for changing
pointer button to adjust
button to save your
Esc
button to exit.
Menu
, and confirm as needed.
Reset
.
Reset All
pointer
.
Enter
note
Reset All
Computer Inputs, User's
Logo, Language, Screen ID,
Network, or Lamp settings.
To reset the Computer
Inputs, use the Reset option
on the signal menu. To
reset the User's logo and
Language settings, use the
Reset option on the
Extended menu.
Configuring the Projector
does not reset the
51