Connecting To A Component Video Source - Epson Pro EX9220 User Manual

Note: The projector converts the digital audio signal sent from your video source into a mono analog
signal for the internal speaker.
Parent topic:

Connecting to a Component Video Source

If your video source has component video ports, you can connect it to the projector using an optional
component-to-VGA video cable. Depending on your component ports, you may need to use an adapter
cable along with a component video cable.
1. Connect the component connectors to your video source's color-coded component video output
ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors
to your component video cable.
2. Connect the VGA connector to the Computer port on the projector.
EX3260/EX5260/Pro EX7260/VS250/VS350/VS355
Connecting to Video Sources
40