Connecting To An Sdi Video Source; Connecting To A Component Video Source - Epson EB-PU1006W User Manual

Connecting to an SDI Video Source

If your video source has an SDI port, you can connect it to the projector using an optional BNC video
cable (EB-PU2010B/EB-PU2010W only).
1. Connect the BNC video cable to your video source's SDI output port.
2. Connect the other end to the projector's SDI port.
Parent topic:

Connecting to a Component Video Source

If your video source has component video ports, you can connect it to the projector using an optional
component-to-VGA video cable. Depending on your component ports, you may need to use an adapter
cable along with a component video cable.
1. Connect the component connectors to your video source's color-coded component video output
ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors
to your component video cable.
2. Connect the VGA connector to the Computer port on the projector.
Connecting to Video Sources
39