note
The Easy Management
software cannot be installed
on Macintosh systems.
note
If you need to uninstall
the software, use the
Add/Remove Programs
utility in the Windows
Control Panel.
Managing the Projector from a Remote Computer
74
Installing the Easy Management
Software
The projector software CD-ROM includes the software you need to
use EMP Monitor.
System Requirements
Before you install the software, make sure your computer meets these
requirements:
®
Microsoft
Windows 98 SE, XP, 2000, Me, or NT 4.0 (service
■
pack 6a or later)
®
Pentium
MMX 166 MHz processor (Pentium II 233 MHz or
■
better recommended)
■
At least 128MB of RAM (256MB or more recommended)
At least 20MB of free hard disk space
■
SVGA (800 × 600) or better display adapter and monitor
■
Installing the Software
Follow these steps to install the software:
1. Insert the projector software CD-ROM in your computer's
CD-ROM drive. The installer starts automatically.
2. Follow the on-screen instructions to install the software.
Once installed, you can access EMP Monitor from your computer's
Start menu.