Setting A Password - Epson PowerLite 6100i User Manual

note
If a password has already
been set, you're prompted for
a password when entering
the Password Protect menu.
To enter the password, see
"Starting the Projector with
a Password" on page 71.
Configuring the Projector
68
8. To display your screen logo when the A/V Mute button is
pressed, select
A/V Mute
9. Select and press
Logo
10. When you're finished, press the
control to exit the menu system.

Setting a Password

Follow the steps below to set a password for the projector.
1. Press and hold down the
until you see the Password Protect menu:
2. Select and press
Password
3. When you see the
and press .
Enter
4. Press and hold down the
you use the numeric keypad to enter a 4-digit password.
The password will be displayed as
digit, a confirmation screen appears. Enter the password again.
5. After you are finished setting the password, press the
button to exit to the Password Protect menu.
Make a note of the password and keep it in a safe place in case you
forget it.
and press
Enter
.
Enter
button on the remote
Menu
button on the remote control
Freeze
.
Enter
Change the password?
key on the remote control while
Num
. After you enter the last
****
.
message, select
Yes
Menu