Connecting To Video Sources; Connecting To An Hdmi Video Source; Connecting To A Component-To-Vga Video Source - Epson EH-TW650 User Manual

Projector Connections

Connecting to Video Sources

Follow the instructions in these sections to connect video devices to the
projector.
• If the port on the device you connect has an unusual shape, use the
a
cable supplied with the device or an optional cable to connect to the
projector.
• The cable differs depending on the output signal from the connected
video devices.
• Some video devices are capable of outputting different types of
signals. See your video device manual to confirm what type of signals
can be output.
g g Related Links
• "Connecting to an HDMI Video Source"
• "Connecting to a Component-to-VGA Video Source"
• "Connecting to a Composite Video Source"

Connecting to an HDMI Video Source

If your video source has an HDMI port, you can connect it to the projector
using an HDMI cable and send the image source's audio with the projected
image.
Attention
Do not turn on the video source before connecting it to the projector. Doing so
could damage the projector.
a
Connect the HDMI cable to your video source's HDMI output port.
p.22
p.22
p.23
b
Connect the other end to the projector's HDMI port.

Connecting to a Component-to-VGA Video Source

If your video source has component video ports, you can connect it to the
projector using a component-to-VGA video cable. Depending on your
component ports, you may need to use an adapter cable along with a
component video cable.
You can play sound through the projector's speaker system by connecting a
commercially available RCA audio cable.
• Make sure the audio cable is labeled "No resistance".
a
a
Connect the component connectors to your video source's color-coded
component video output ports.
The ports usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using
a
an adapter, connect these connectors to your component video
cable.
22