Capturing Images; Saving Images On The Memory Card - Epson PowerLite 505c User Manual

Capturing Images

EasyMP lets you capture any image displayed on the projector and
save it on the memory card. You can capture images from video or
computer sources. Once you have captured an image or a series of
images, you can play them back through EasyMP.

Saving Images on the Memory Card

You use the projector's built-in Capture menu to capture and save
images on the memory card. Start by displaying the image you want—
either from a computer source or a video source such as a VCR or
digital camera.
1. Press the button on the remote control. You see the main
Menu
menu.
2. Press down on the
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Return :Select
3. Press to highlight
Enter
select it. You see the message shown at the right.
4. Select and press
Yes
5. When you see the message "Do you use this image?" select
and press .
Enter
Saving the image may take a few moments. Do not use the
projector or other sources (computer, video, speaker, etc.) while
the image is being saved.
button to highlight the
Enter
Image Capture Execute
User's Logo Capture Execute
:Execute
and press
Image Capture
.
Enter
menu.
Capture
again to
Enter
Yes
:Return
Presenting Without a Computer
Image Capture
Do you save the present image
to the Memory Card?
Yes No
:Select :Execute
65