Replacing The Lamp - Epson PowerLite 505c User Manual
Epson home theatre projector user's guide 505c,715c
Hide thumbs
Also See for PowerLite 505c:
- Product information (13 pages) ,
- Specifications (2 pages) ,
- User manual (1 page)
Table of Contents
Advertisement
note
You can check to see how
many hours the lamp has
been used. See page 81.
Maintaining and Transporting the Projector
86
4. If you need to replace the filter, use a small screwdriver to pry it
off.
5. To install the new filter, first insert the tab, then press down until
it clicks in place.
Replacing the Lamp
The projection lamp typically lasts for about 1000 hours of use. It is
time to replace the lamp when:
The projection image gets darker or starts to deteriorate.
The lamp warning light
The message
LAMP REPLACE
lamp comes on (after about 900 hours of use). To maintain
projector brightness and image quality, replace the lamp as soon
as possible.
Contact your dealer or call EPSON at (800) 873-7766 in the United
States and Canada for a replacement lamp. Request part number
.
ELPLP14
is flashing red or orange.
appears on the screen when the
Advertisement
Table of Contents
